What's New | Suppliers | Information | Articles & Tips | Photo Gallery | Contact Us

Photo Gallery

New Photos

Leon Clark

Robert Leners

Mike O'Connell

Old Photos

David Berriman
Norm Buckhart
Jack Burgess
Warner Clark
Bill Davis
Gene Deimling
Pat Duffin
John Eichman
Matt Forsyth
Michael George
Woody Grosdoff
Jim Harper
Jim Hickey
Robert Leners
George Losse
Tom Mix
Ed Nadolski
Dan Pence
Roy Pietschmann
Stan Schwedler
Scott Spears
Brett Whelan
Bill Yancey
Jim Zwernemann

Photo Gallery: Warner Clark
Photos by Robert Bourgerie

Maumee Basin Lines
The Maumee Basin Line is composed of selectively compressed parts from three prototype railroads: one, the First Subdivision of Nickel Plate Road's Clover Leaf District from Toledo to Continental, Ohio; (70 feet continuous loop operation); two, the Northern District of the Detroit Toledo & Ironton's lines between Malinta and Champion / Denson, Ohio (27 feet point to point operation); and three, The Ohio & Morenci Railroad's line between Champion, Ohio and Morenci, Michigan (98 feet point to point operation)

The initial building effort is directed at the continuous loop NKP line, to be followed by the DT&I and finally the O&MRR. All permanent track is hand laid to P48 standards, and using A.R.E.A. or NKP track plans. Rail is nickel silver with switch and crossing components by High Sierra and Right-O-Way. Code 138 rail is used on NKP and DT&I mains, while code 125 rail is used in sidings and secondary lines for both roads. Track switches are either #8 or 10. Curves without easements are 60" radius. Curves with spirals are 64" radius. Cross ties are made from bass wood, sized 7" X 9". All track is laid on two � inch sheets of Homosote.

The O&MRR is a short line running over a former interurban railroad (Toledo & Western) which has had its overhead wire removed. The Line is hand laid track using code 100 rail and 6" X 8" bass wood ties. Switches are all #6 and main line curves are laid to a 52" min. radius. Street embedded trackage at Morenci will be code 125 with curves as tight as 36" radius. The O&MRR grade from Denson (lower level) to Morenci (upper level) is 4.4%. When completed, all car load interchange between O&MRR and NKP will need to be routed via DT&I.

Construction notes: Main level operation is at 39" off the floor; while the upper level is 58" off the floor. Over all size of 'L' shaped layout is 26.5 ft .by 19 ft. Power control will be provided by tether less NCE dcc. Switches are Tortoise powered by manual hand throws. Couplers are San Juan AAR Type E couplers. All three lines are run under timetable and train order. Layout operation represents decade between 1945 and 1955.

The operation you will see covers the NKP line from the Continental Depot (clockwise) to Malinta, Turkey Foot Creek, Roseburg Pike, Maumee River, Telegraph Road (US 24), MC Junction (engine service facility), Gould Curve and finally the Toledo depot (same depot as found at origin).

Warner's layout is loaded with interesting vignettes filled with models set in a realistic setting. The station and signal tower were scratchbuilt using Midwestern prototypes as a guide. The train order signal and crossing signals were built by Charlie Morrill. Warner has skillfully blended foreground models and scenery with two-dimensional background. The scenes appear to go beyond the wall.







Warner Clark's Second Photo Page